Massive Audio M8 Spécifications télécharger pdf (Page 8)

Issue 2 Page 8 of 13

SINGLE-ENDED (RCA) INPUT

To use the RCA INPUT, connect RCA source outputs to the INPUT RCA sockets. Make sure the

BALANCED/RCA switch is set for RCA.

BALANCED/RCA switch set to RCA

RCA leads connection diagram.

(Trigger and mains leads omitted for clarity).

Note: The two RED speaker terminals are internally connected together. Similarly, the two BLACK speaker

terminals are also internally connected together.

The diagram above shows the speakers connected to the LEFT hand output posts. It is also perfectly

acceptable to use the RIGHT hand output posts as they are exactly the same connection internally.

IMPORTANT: BALANCED/RCA switch

The BALANCED/RCA switch (see page 7) is included to minimise noise when using the unit in RCA mode. In

most cases it will operate in BALANCED position on RCA inputs with no appreciable audible increase in noise.

There is no harm in operating the unit in this way.

However it is important, that if using the XLR (BALANCED) input, the switch must be set for BALANCED. If the

switch is not set for BALANCED on an XLR input, a 6dB reduction in loudness will occur and the benefits of

BALANCED operation will be lost.

OPERATION

LEFT RCA output

Pre-amplifier

RIGHT RCA out

RIGHT

Speaker

LEFT

Speaker

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

Massive Audio M8 Spécifications Page 8